TTLLS-Cable – Liquid Level Sensor

1.970,00 2.303,00 

All prices are excl. VAT

TTLLS-Cable – Liquid Level Sensor

* All sensors comes with default SW configuration: NH3, DN40 1 ½”, -55ºC, 1200mm, it can easily be changed by TT SmartConfig APP.

*If configuration is required when ordering, a fee of 6 € will be added per sensor.

Register account to purchase

The Typhon Technologies TTLLS-Cable is an Electronic Liquid Level Sensor, cost efficient and reliable level sensor used for liquid level measurement in all types of cooling systems.

The Liquid level sensor is used for monitoring the liquid level in standpipes and other applications, where level monitoring is needed. The liquid level sensor has an analog output, which can be selected as either mA or Voltage for indication for 0-100% level.

The installation is simple with only one-point installation, it comes with different thread types. TTLLS-Cable have smart commissioning via Bluetooth connected to the TT SmartConfig App, which easy allow the user to select the desired refrigerant media and controlling the output.

With the TTLLS-Cable and the High-end technology within the capacitive measuring principle, combined with integrated AI technology it takes the Liquid Level Sensor to a new level, offering cost-efficiency, reliability, and user-friendliness. This high-end technology also makes it possible to not use any isolating material on the electrode.

The capacitive measuring principle makes sure that the mechanical part is never worn down, because there are no moving parts inside the mechanical part. Because of the High-end patent pending technology within the capacitive measuring principle the same mechanical part can used within all types of refrigerant media.

TTLLS-Cable is constructed with the user in mind, it easy to install with only one connection point, and replacement of the electronic part can be done without affecting the pressurized or empty the subsystem.

The TTLLS-Cable detect level in all types of refrigerant media e.g. NH3, Alcohol, HFC, HFO, CFC, OIL, CO2, Butane, Propane, Isobutane and Water (Pure) – Simply connect to the TT SmartConfig App and configure the sensor for the given application.

The TTLLS-Cable shall be installed in standpipe from 1” to 4” standpipe, if necessary to measure directly into a vessel or tank use the TTLLS Liquid Level Sensor.

The TTLLS-Cable is not suitable for marine applications, use the TTLLS Liquid Level sensor.